Advertisement
2. Connect AV cable
Connecting to a TV:
a. Insert the white plug into the audio-in jack (usually
white) on your TV.
b. Insert the yellow plug into the video-in jack (usually
yellow) on your TV.
NOTE: These jacks are normally found on the front of the
TV near the adjustment controls, or on the back of the TV
near the antenna and cable connections.
c. Turn on your TV.
d. Set your TV to the channel/video input mode directed
by your TV owner's manual.
Connecting to a VCR or DVD player:
a. Make sure the VCR or DVD player is properly connected to your TV.
b. Insert the white plug into the white audio-in jack on your VCR or DVD
player.
c. Insert the yellow plug into the yellow video-in jack on your VCR or
DVD player.
d. Turn on your TV and VCR or DVD player.
e. Set your TV and VCR or DVD player to the channel/video input
mode directed by your TV, VCR or DVD player owner's manuals.
(See Troubleshooting on p. 9, if necessary, for further information.)
AUDIO PLUG
VIDEO INPUT
(WHITE)
AUDIO INPUT
VIDEO PLUG
(YELLOW)
3
BLASTER BUTTONS AND FEATURES
Control Pad
When there's a directional arrow onscreen,
use control pad to move from one area to
another by pressing up, down, left and right.
Safety
Press to pause or quit the game during play.
On/Off
Slide to turn game on and off.
Main Trigger
Squeeze to shoot blaster; you can either
press and release for single shots or hold
down for rapid-fire action. Also use to
accept menu screen selections.
Secondary Trigger
Squeeze to launch thermal detonators or
concussion missiles when available.
4
Advertisement
