Program Settings; Language; Gps Status; Security (Safety Lock) - Nextar M3-07 Software Manual

4 — Program Settings

Language

>

GPS Status

>

Security (Safety Lock)

The Security (Safety Lock) feature enables you to set a passcode to secure and encrypt all
personal data. If you lose the device, or if someone is able to get data out of the device, the data
remains securely encrypted. Without the correct password, no one can use the device. If you
forget your password, you may use the factory reset password (20500). NOTE: Use of the
factory reset password ERASES all personal data from the device.
>
Points to Observe for Safe Usage
>
Tap to select an option, and then tap OK.
>
Displays GPS status.
>
Tap Set/Change PIN to enable the security feature.
The system will prompt you for a passcode.
Subsequent use of the device will require the code.
Tap Unlock Device to disable the security feature.
15