Epson Equity III Product Support Bulletin page 25

What memory expansion boards are compatible with the Equity II +
Q10.
and Equity Ill + (10MHz models)?
A.
The following boards have been tested by Epson in the Equity II +
and Equity Ill + (10MHz models):
Advantage Premium
Rampage
Above Board 286
Above Board 286 p/s
Grande Byte
Rio Grande
Elite 16
* Will run at 8MHz, not at 10MHt.
Q11. What memory expansion boards are compatible with the Equity II +
and Equity Ill + (12MHz models)?
A.
The following boards have been tested by Epson in the Equity II +
and Equity III + (12MHz models):
Rampage 286 Plus
Elite 16
Above Board Plus
NOTE: Previously boards from Micron Technology were listed as compatible
with the 12MHz models of the Equity II + and Equity Ill +. They
have been removed from the list because Micron no longer produces
ISA memory boards.
Q12.
How do you expand the memory of the Equity 386/20?
A.
Memory expansion in the Equity 386/20 can be accomplished by
adding SlMMs (single in - line memory modules) to the CHET - RM
board. Both 256K and 1Mb SlMMs are available from Epson
America. The 256K SlMMs are sold in 1Mb kits and the 1Mb
SlMMs are sold in 2Mb kits. Compatible third party 1Mb SlMMs are
available from Matsushita, Toshiba and CDC Enterprises. You can
also use third party memory expansion boards such as those listed
above for the Equity II +/Ill +.
286 *
*
*
PSB No: S-0047C
Page: 4 of 6
AST Research
AST Research
Intel Corporation
Intel Corporation
STB Systems
STB Systems
Profit Systems
AST Research
Profit Systems
Intel Corporation