Bush S322 Instruction Manual page 33

USB MODE
When connecting/removing the USB device
1. Press SOURCE on the remote control unit to select USB option.
2.Insert USB equipment into corresponding USB interface 2s after starting the system.
3. After entering the system menu, press
require USB files press "OK" button to confirm the selection and enter the interface .
4. Press / on the remote control unit to select the required file, press OK button
to enter the selected file.
5. To exit the streaming media playing system and watch a TV program, you must press
"BACK"button to return to the streaming media main menu at first(to protect equipment),
and then press SOURCE to select TV to return to the TV mode.
Notes:
1. Under source of US , when press button MENU screen goes black, except when B
images or movies are being played.
2.While playing the USB ,press "BACK"button repeatly, the screen picture will return
to USB main interface,and only at this time you can switch corresponding signal
sources by pressing "SOURCE" again.
3. Please do not turn off the TV or unplug the USB device when the connected USB
storage device is working.When such device is suddenly separated or unplugged, the
stored files or the USB storage device may be damaged.
/ on the remote control unit to select the
,
P.32