Autodesk Design Suite 3D - Planix Home Design Suite 3D Installation Manual page 121

10 Click Start Server.
11 Close LMTOOLS.
Mac OS X and Linux Procedures to Update FLEXnet
To determine the installed version of FLEXnet, you need to verify the version
of the following files:
lmgrd
lmutil
adskflex
NOTE Version 11.9.0.0 of the FLEXnet license manager that ships with Autodesk
products is backwards compatible, and will administer licenses for products from
versions 2002 through 2012. Please note that Autodesk products older than version
2005 are no longer supported.
To verify the version of Mac OS X or Linux tools
You should be logged in with the same user ID you used when installing the
FLEXnet files, for example, /Users/<userid>/adsknlm (Mac OS X) or
/home/<userid>/adsknlm (Linux).
Enter the following commands in the terminal window/prompt:
<prompt>./lmutil -v
<prompt>./lmgrd -v
<prompt>./adskflex -v
The output of each command will look similar to this example:
Copyright
©
1989-2010 Macrovision Europe Ltd. And/or Macrovision
Corporation.
All Rights reserved.
lmutil v11.5.0.0 build 56285 i86_mac10
Network Licensing | 115