Plug And Play Capability; Flat Panel Specifications - Dell Crystal User Manual

Pin Number 4-pin Side of the connector
1 VCC
2 DMD
3 DPD
4 GND
NOTE: The USB connector is only available for webcam.
NOTE: USB 2.0 capability requires 2.0-capable computer.
NOTE: The USB interface of the monitor works ONLY when monitor is powered ON (or in Power Save Mode). Switching your monitor OFF and then ON would re
enumerate its USB interface; attached peripherals may take a few seconds to resume normal functionality.

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID)
using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select
different settings, if desired.

Flat Panel Specifications

Screen type
Screen dimensions
Preset display area:
Horizontal
Vertical
Pixel pitch
Viewing angle
Luminance output
Active matrix - TFT LCD
22 inches (22-inch viewable image size)
473.76 mm (18.65 inches)
296.1 mm (11.66 inches)
0.282 mm
160° (vertical) typ, 160° (horizontal) typ
270 cd/m ²(typ)