Cisco 3825 - Voice Bundle Router Troubleshooting Manual page 11

Troubleshooting guide
Hide thumbs Also See for 3825 - Voice Bundle Router:
Table of Contents

Advertisement

Error Message Fan 1|2|3 had a rotation error reported.
Error Message Voltage 1|2|3|4 (3300 mv|5150 mv|2500 mv|1200 mv) has exceeded
recommended operating limits.
Cisco 3845 Router Error Messages
The Cisco 3845 router supports two internal power supplies and returns the following error messages for
them.
Error Message System detected SYS PS 1|2 input voltage fail condition.
Error Message System detected SYS PS 1|2 output voltage fail condition.
Error Message System detected AUX (-48V) PS 1|2 fail condition.
OL-5972-01
Explanation
The specified fan is not rotating at the desired speed.
If this error is detected, the router system software automatically increases the
Recommended Action
fan speed to high. If the rotation error disappears, fan speed is kept at high. If this error appears
repeatedly, there is something wrong with the fan. The error will reappear until action is taken.
Explanation
One of the internal voltage outputs is outside its operating limits.
System failure. See the
Recommended Action
of
"Introduction to Cisco 3800 Series Routers Hardware Documentation"
customer service.
Power to the indicated power supply has failed.
Explanation
Recommended Action
Check the input power source and power cable.
The indicated power supply has failed.
Explanation
Recommended Action
Replace the power supply. See
in Cisco 3800 Series
Routers."
The indicated AC power supply with IP phone power output has failed.
Explanation
Recommended Action
Replace the power supply. See
in Cisco 3800 Series
Routers."
"Obtaining Technical Assistance" section on page 12
"Installing and Upgrading Internal Components
"Installing and Upgrading Internal Components
Troubleshooting Cisco 3800 Series Routers
Error Messages
for information about
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3845 - security bundle router3800 series

Table of Contents