Samsung UN55EH6070F E-Manual page 50

●
If your network requires a Dynamic IP address, you should use an ADSL
modem or router that supports the Dynamic Host Configuration Protocol
(DHCP). Modems and routers that support DHCP automatically provide the
IP address, subnet mask, gateway, and DNS values your TV needs to access
the Internet so you do not have to enter them manually. Most home networks
use a Dynamic IP address.
Some networks require a Static IP address. If your network requires a Static
IP address, you must enter the IP address, subnet mask, gateway, and
DNS values manually on your TV's Cable Setup Screen when you set up the
network connection. To get the IP address, subnet mask, gateway, and DNS
◀
values, contact your Internet Service Provider (ISP). If you have a Windows
computer, you can also get these values through your computer.
N You can use ADSL modems that support DHCP if your network requires
a Static IP address. ADSL modems that support DHCP also let you use
Static IP addresses.
It is not supported when the network speed is below or equal to 10Mbps.
N
Use Cat 6 (*STP Type) cable for the connection. (*Shielded Twist Pair)
N
English
▶