Table of Contents
Advertisement
Installing a memory module with the computer's power on may
damage the computer, the module, or both.
The computer has two memory slots—Slot A and Slot B. You can
install one or two memory modules.
Before you install or remove a memory module, turn off the
computer, unplug the AC adaptor, and remove the battery. If you
install or remove a memory module while the computer is in Sleep or
Hibernation mode, data will be lost.
NOTE
For this model, Slot A is the bottom slot. Slot B is the top slot. If only
one memory module is to be installed, it must be installed in Slot A.
If the computer is on, begin at step 1; otherwise, skip to step 5.
1
From the Start or Desktop screen, move your pointer over the
upper or lower right corner of the screen.
2
When the Windows
Charm.
Pressing the power button before shutting down the Windows®
operating system could cause you to lose your work. Make sure the
system indicator panel's storage drive light and the drive in-use light
are off. If you turn off the power while a disk/disc is being accessed,
you may lose data or damage the disk/disc and/or drive.
3
In the lower right of the screen click the Power (
(Sample Image) Shut down
Adding memory (optional)
®
Charms appear, click the Settings ( )
Shut down option
Power
Getting Started
) icon.
47
Advertisement
Table of Contents
