Samsung NP900X3B Series 9 Notebook User Manual page 90

Samsung Recovery Solution
3
Select either Basic Restore or Complete Restore from the
Restore menu.
To restore the computer to the initial state, click Computer
Initial State and perform the restoration process according
to the instructions that appear on the screen.
Run Complete Restore if the computer does not work even
after Basic Restore has been completed.
(Optional)
In the Advanced menu, you can change the size of the hard
drive partitions (e.g. C: and D:).
•
•
Since a Complete Restore deletes all user data as well
as additionally installed programs, please backup your
important data fi rst using the Data Backup function, before
running Complete Restore.
4
The computer boots up into restoration mode and the
restoration progress message appears. If you click OK, the
restoration begins. The restoration may take some time,
please wait for a moment.
5
When the 'Restart the System' message appears after the
restoration is complete, click OK to restart the system.
Make sure that the power cord is connected while the
restoration is in process. The fi rst time the computer boots
up after a Complete Restore has been performed, the speed
of the boot process may be slowed down due to the system
optimization process. At this time, do not shut the computer
down by force.
Make sure to backup your data in advance, as all data will
be deleted after the partition size is changed.
Advanced menu is only activated when the computer
The
boots up in the restoration area.
(by pressing the key during the booting sequence.)
Chapter 4.
89
Backup / Restore