5
Select Country.
(Depending on the
country)
6
Auto Tuning (1):
Selecting how you
watch your TV
7
Auto Tuning (2):
Selecting a search
options and Region
Selection (Depending
on the country)
8
Clock: Setting the
Clock Mode
9
Time Zone
(Depending on the
country): Setting the
your Time Zone
10
Voice and motion
control: Setting the
Voice and motion
control function.
11
Setup Complete
12
Set the Universal
Remote
If You Want to Reset This Feature...
Menu → System →Setup
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
If you forget the PIN code, press the remote control buttons in the following sequence in Standby
✎
mode, which resets the PIN to "0-0-0-0":
Select the appropriate country.
After selecting the country in the Country menu, some models
✎
may proceed with an additional option to setup the pin number.
Let's find and store channels on your TV. Do you need to search for
channels?
• Yes, I need to.: All the channels available will be found and stored
on your TV.
• No, I don't need to.: My set-top box provides all the channels that
are available, so I don't need to search for channels.
Select the channel source to memorise. When setting the aerial
source to Cable, a step appears allowing you to assign numerical
values (channel frequencies) to the channels. For more information,
refer to Auto Tuning (Channel Menu → Memorizing Channels) in the
e-Manual.
When Air or Cable is selected first: After all Air or Cable channels
✎
are stored, the step for storing Satellite channels is displayed.
When Satellite is selected first: After all Satellite channels are
✎
stored, the step for storing Air or Cable channels is displayed.
Select Stop at any time to interrupt the memorization process.
✎
• Auto: Set the current time automatically.
• Manual: Allows you to manually set the current date and time.
This step is only available when the clock mode is set to Auto.
• Auto: Set the time zone automatically.
• Manual: Set the time zone manually.
If you selected Manual, you can select whether to turn DST
✎
(Daylight Savings Time) On or Off. (Depending on the country)
You can turn the Voice and motion control function On or
✎
Off. Select Off or On, and then select Next. For more detailed
information, refer to "SMART Interaction" (p.17)
Select Close to finish.
The completed settings are displayed.
✎
1. Turn on the
POWER
then press the PAIRING button.
2. Select Yes to start the Universal Remote Setup.
For more detailed information about the Universal Remote Setup,
✎
refer to "Setting up the Universal Remote Control" section in the
manual (page 30).
→
→
MUTE
8
English - 10
button on the bottom of the IR Blaster, and
→
→
2
4
POWER
(on).