Connecting To The Audio System; Back Panel Audio Connectors - Intel DQ67SW Product Manual

Connecting to the Audio System

After installing the Realtek audio driver from the Intel
the multi-channel audio feature can be enabled. Figure 22 shows the back panel audio
connectors. The default connector assignments are shown in the table.
NOTE
The back panel line out connector is designed to power either headphones or amplified
speakers only. Poor audio quality may occur if passive (non-amplified) speakers are
connected to this output.
Installing and Replacing Desktop Board Components
Item Description
A Line in
B Line out (front speaker/headphones)
C Mic in
Figure 22. Back Panel Audio Connectors
®
Express Installer DVD-ROM,
55