Table of Contents
Advertisement
Important notices for RAID setting:
Before you replace the system board, make sure that you read "Installing and
configuring RAID" on page 71, and have the necessary information.
After you replaced the system board, you need to recover the RAID mode in
BIOS Setup Utility menu as follows:
Config -> Serial ATA (SATA) -> SATA Controller Mode Option ->
Compatibility/AHCI/RAID
For access, remove these FRUs, in order:
v "1010 Battery pack" on page 88
v "1020 Digitizer pen" on page 89
v "1030 Serial Ultrabay Enhanced device" on page 90
v "1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state
drive (SSD) and storage converter" on page 91
v "1050 DIMM slot cover and DIMM" on page 94
v "1060 Palm rest or palm rest with fingerprint reader" on page 96
v "1080 Keyboard" on page 101
v "1090 Backup battery" on page 103
v "1100 Numeric keypad" on page 104
v "1110 Keyboard bezel and speaker assembly" on page 107
v "1120 Wireless USB adapter or Intel Turbo Memory Minicard" on page 110
v "1130 PCI Express Mini Card for wireless LAN/WiMAX" on page 112
v "1150 CPU thermal device/fan" on page 116
v "1160 VGA thermal device/fan" on page 118
v "1170 CPU" on page 120
v "1180 Video card" on page 121
v "1190 HDD I/O sub card" on page 123
v "1200 LCD unit" on page 126
v "1210 Structure frame" on page 129
Removing and replacing a FRU
135
Advertisement
Table of Contents
