LG LFX31925ST Owner's Manual page 28

28 HOW TO USE
Control Panel Features (continued)
Change Filter
When the Change Filter icon turns on, the air
filter needs to be replaced. After replacing the
air filter, press and hold the Fresh Air Filter
button for three seconds to turn the icon light
off. It is recommended to change the air filter
approximately every 6 months.
Ice Plus
This function increases both ice making and
freezing capabilities.
When you touch the
y
graphic will illuminate in the display and
will continue for 24 hours. The function will
automatically shut off after 24 hours.
You can stop this function manually by
y
touching the button one more time.
Energy Saving
The Energy Saving function disables the
mullion heater located on the refrigerator door
in order to conserve electricity. Press and hold
the Energy Saving button for three seconds to
activate or deactivate this function.
NOTE
Discontinue using the Energy Saving
function if excessive moisture begins to
collect on the door mullion.
Light
When you press the Light button, the
dispenser light will turn on and the indicator
will appear on the LED display.
( On some
[ ]
models)
Ice Plus button, the
Change Water Filter
When the water filter indicator turns on, you
have to change the water filter. After changing
the water filter, press and hold the Change
Filter button for three seconds to turn the
indicator light off. You need to change the
water filter approximately every six months.
Door Alarm
When power is connected to the
y
refrigerator, the door alarm is initially set to
ON. When you press the Door Alarm button,
the display will change to OFF and the Door
Alarm function will deactivate.
When either the refrigerator or the freezer
y
door is left open for more than 60 seconds,
the alarm tone will sound to let you know
that the door is open.
When you close the door, the door alarm
y
will stop.
Control Lock
The Control Lock function disables every other
button on the display.
When power is initially connected to the
y
refrigerator, the Lock function is off.
If you want to activate the
y
lock other buttons, press and hold the Lock
button for three seconds or more. The Lock
icon will display and the Lock function is
now enabled.
To disable the Lock function, press and hold
y
the Lock button for approximately three
seconds.
Power Saving Mode
When the refrigerator is in the
y
Mode , the display will remain off until a door
is opened or a button is pressed. Once on,
the display will remain on for 20 seconds.
Lock function to
Power Saving