Setting Up Anynet; Switching Between Anynet + Devices - Samsung LN46B550K1F User Manual

Setting Up Anynet +

¦
Press the TOOLS button to display the Tools menu. You can also display Anynet + menu by selecting Tools → Anynet +
T
(HDMI-CEC).
Setup
❑
Anynet + (HDMI-CEC) → Off / On

To use the Anynet + Function, Anynet + (HDMI-CEC) must be set to On.
When the Anynet + (HDMI-CEC) function is disabled, all the Anynet + related operations
N
are deactivated.
Auto Turn Off → No / Yes

Setting an Anynet + Device to turn Off Automatically when the TV is Turned Off
The active source on the TV remote must be set to TV to use the Anynet + function.
N
If you set Auto Turn Off to Yes, connected external devices are also turned off when the
N
TV is turned off. If an external device is still recording, it may or may not turn off.

Switching between Anynet + Devices

¦
1. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).
2. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
Anynet + devices connected to the TV are listed.
N
If you cannot find a device you want, press the red button to scan for devices.
N
. Press the ▲ or ▼ button to select a particular device and press the ENTERE button. It
is switched to the selected device.
Only when you set Anynet + (HDMI-CEC) to On in the Application menu, the Device
N
List menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
N
operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
N
When the device scan is complete, the number of devices found are not displayed.
N
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to
N
the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to
search for the connected device.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet + function. Make sure to
N
switch to an Anynet + device by using the Device List.
English - 
Anynet (HDMI-CEC) ►
+
Media play (USB)
Device List
Setup
Move Enter Return
U E R
Anynet + (HDMI-CEC)
: On
Auto Turn Off : Yes
Move Enter Return
U E R
View TV
Device List
Record : DVDR
DVDR Menu
DVDR Operation
Setup
Move Enter Return
U E R