Behringer Europower PMP960M User Manual page 11

EUROPOWER PMP960M/PMP980S/PMP1280S User Manual
This illustration shows just one example of how the channels of
your power mixer can be used, including the connection of mono
and stereo sources, and the tape ins and outs recording the mix
signal or playing back external signals.
Fig. 5.3: Standard set-up (example)
One example of how to use your power mixer with a subwoofer
in bridged mono mode. The illustration shows the PMP1280S
with a subwoofer connected to OUTPUT B that will receive the
full (bridged) output power. A separate stereo power amp
(BEHRINGER EUROPOWER EP2000) for the stereo main P.A.
signal is connected to the Pre Amp Main outputs. The Pre Amp
monitor output is wired to active speakers on the stage. This
application can also be realized with the PMP960M, except for
the main P.A. signal, which would be mono.
Fig. 5.4: EUROPOWER in bridged mono mode
11
MONITOR