Listening To Music; Listening To Music Using Bluetooth; Listening To Music Using The Audio Cable - Denon GLOBE CRUISER AH-W200 Owner's Manual

Listening to Music

When using the headphones wirelessly, make sure that the Bluetooth
function on the Bluetooth device is enabled. When using the
headphones with the cable connected, make sure that the Bluetooth
function is disabled.

Listening to music using Bluetooth

Operates the paired Bluetooth device using the control button.
NOTE
The Bluetooth function will turn off automatically when a device is
connected using the audio cable, and operation of the connected
Bluetooth device using the headphones will be disabled.
w
e
Play/Pause
Press q one time
Next track
Press q two times
Previous track
Press q three times
Operates after q has been
Fast forward
pressed two times in quick
succession
Operates after q has been
Rewind
pressed three times in quick
succession
Increase volume
Press w
Decrease volume
Press e
The blue LED indicator will light up continuously during playback.
• These headphones are compatible with SCMS-T copy protection.
They can be used to listen to audio from mobile phones, one-seg
TVs, and other SCMS-T–compatible devices.
• In order to listen to music using a Bluetooth connection, the
connected Bluetooth device must support A2DP (Advanced Audio
Distribution Profile). z
• In order to control audio playback from the connected Bluetooth
device using the headphone controls, the connected Bluetooth
device must support AVRCP (Audio Video Remote Control Profile). z
z Refer to the Bluetooth device's owner's manual for information on
supported Bluetooth profiles.

Listening to music using the audio cable

3.5 mm plug
q
Use the included audio cable when not using the Bluetooth function,
when connecting to a device that does not support Bluetooth, etc.
NOTE
Bluetooth calling and audio device control functions on the headphones
cannot be used when connecting using the audio cable.
2.5 mm plug
5