Aux Operations; Troubleshooting - Clarion CZ102 Owner's Manual

CDIMP3/WMA Operations
Other various play functions
Scan play
This function allows you to locate and play the
first 1 0 seconds of all the tracks recorded on a
disc.
Press the [ 1 ] button to perform scan play.
Repeat play
This function allows you to play the current
track repeatedly or play a track currently being
played in the MP3/WMA folderrepeatedly.
CD:
1 . Press the [
2 ]
button once or more until
"APT
ON" appears on the LCD to perform repeat
play.
2. Press [ 2 ] button repeatedly until "APT
OFF" appears on the LCD to cancel repeat
playback.
AUX Operations
Press [SAC I
(!) ]
button on the panel or remote
control to select "AUX".
AUX is just for audio content with 3.5mm Jack
connector plugged into audio-in socket on the
front panel.
AUX Input sensitivity setting
1. Press and hold the
[DISP]
button (1 sec.).
2. Turn the
[VOLUME]
knob to select
"AUX
SENS".
3. If the output level of connected external
audio player is
"HIGH",
rotate
[VOLUME]
knob and choose
"LOW".
And if the output
level is
"LOW",
choose
"HIGH".
MP3/WMA:
1 . Press the [ 2 ] button once or more until
"TRACK RPT'
appears on the display to
perform repeat play, and
"RPT'
segment
lights on.
2. For MP3/WMA files, press [
2 )
button
repeatedly until
"FOLDER RPT'
appears
on the display forfolder repeat play.
3. Press [ 2 ] button repeatedly until "RPT
OFF" appears on the display to cancel
repeat playback, and "RPT' segment goes
off.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
Press the [ 3 ] button to perform random
play.
GENERAL
Problem
Unit can not
power on.
Unit can not
power on.
Nothing happens
when buttons are
pressed.
Display is not
accurate.
Remote control
does not work.
No/low audio
output.
Poor sound quality
or distortion.
Tel-Mute
malfunction.
Unit resets itself
when engine is off.
Cause
Measure
Unit fuse blown. Replace with new fuse of correct rating.
Car battery fuse blown. Replace with new fuse of correct rating.
Turn off the power and remove the DCP.
Press the [RESET] button with a thin rod.
Note:
The microprocessor has
When the
[RESET]
button is pressed, turn off
malfunctioned due to noise, etc.
the ACC power.*
*When the
[RESET]
button is pressed,
frequencies of radio stations, titles, etc. stored
in memory are cleared.
Battery depleted. Change the battery.
Battery installed incorrectly. Install the battery correctly.
Improper audio output connection. Check wiring and correct.
Volume set too low. Increase volume level.
Speakers damaged. Replace speakers.
Heavily biased volume balance. Adjust the channel balance to center position.
Speaker wiring is in contact with
Insulate all speaker wiring connections.
metal part of car.
Non-standard disc used. Use a standard disc.
Speaker power rating does not
Replace speakers.
match unit.
Wrong connections. Check wiring and correct.
Speaker is shorted. Check wiring and correct.
MUTE wire is grounded. Check the MUTE wiring and correct.
Incorrect connection between
Check wiring and correct.
ACC and Battery.
CZ102
8