Sanyo WXU30 - PLC - LCD Projector Owner's Manual page 2

Memory viewer function
Memory Viewer function
The Memory Viewer function is to make a presentation or project an image without using computers
or some other external equipment. You do not have to carry a computer or other equipment to project
images.
Store images on a dedicated SD memory card and insert it into the SD memory card slot of the
projector, then you can project those images.
This projector is also equipped with dedicated Network Viewer 4 software to edit the presentation
images to project with the Memory Viewer function. With this function, you can edit images, photo
data, or Power Point data into a more effective presentation data. For further information of the
Network Viewer software, see the chapter "9. Network viewer function" on the separated booklet of
"Network Owner's manual".
Which images can be projected with the Memory Viewer function?
With the Memory Viewer function, you can project images in these formats below.
• Bitmap data
• JPEG data converted with the Network Viewer 4 [File Converter 1 and 2] software.
• Text data
• Program file created with the Network Viewer 4 [Program Editor].
*Some data may not be projected even with these formats.
Text data used with Memory Viewer
Memory viewer supports the text file with the ASCII format for single byte. Other text formats cannot
be supported.
Back up the data
It is recommended that important data to edit with Network Viewer and store in SD memory card
should be stored in other media in advance. We are not responsible for any data losses or damages
resulting from use of the Memory Viewer function.
Trademarks
Microsoft, Windows, and PowerPoint are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries. Each name of corporation or product in this
owner's manual is either a registered trademark or a trademark of its respective corporation.
• The On-Screen Menu and figures in this manual may differ slightly from the product.
• The contents of this manual are subject to change without notice.