Cisco SN6000C Release Note page 14

Software Download Process
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
------
At a minimum, you need to disable the default device alias distribution feature using the no device-alias
distribute command in global configuration mode. The show incompatibility system bootflash:system
image filename command determines which additional features need to be disabled.
If you would like to request a copy of the source code under the terms of either GPL or LGPL, please
Note
send an e-mail to mds-software-disclosure@cisco.com.
Selecting the Correct Software Image for an MDS 9100 Series Switch
The system and kickstart image that you use for an MDS 9100 series switch depends on which switch
you use, as shown in
Table 8
Cisco MDS 9100 Series Switch Type
MDS 9134, 9124, Cisco Fabric Switch for
HP c-Class BladeSystem, Cisco Fabric
Switch for IBM BladeCenter
MDS 9148
Selecting the Correct Software Image for an MDS 9200 Series Switch
The system and kickstart image that you use for an MDS 9200 series switch depends on which switch
you use, as shown in
Table 9
Cisco MDS 9200 Series Switch Type
MDS 9222i
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.0(4b)
14
-------- --------------
1 yes non-disruptive
2 yes disruptive
3 yes disruptive
4 yes non-disruptive
5 yes non-disruptive
6 yes non-disruptive
Table 8.
Software Images for MDS 9100 Series Switches
Table 9.
Software Images for MDS 9200 Series Switches
------------ ------
rolling
rolling Hitless upgrade is not supported
rolling Hitless upgrade is not supported
rolling
reset
reset
Naming Convention
Filename begins with m9100-s2ek9
Filename begins with m9100-s3ek9
Naming Convention
Filename begins with m9200-s2ek9
OL-21012-04