Information - Haier LT22M1CW User Manual

INFORMATION

European Plug Electrical Connections
Connecting to Power
Check that the voltage marked on the product corresponds with your supply voltage.
This product is fitted with a 16A plug (Or 10A Plug). If this plug is unsuitable
or needs to be replaced, please note the following :
Plug Replacement
If you need to replace the fitted plug.
WARNING :
Never connect live or neutral wires to the earth terminal of the plug.
Only fit an approved 16A plug . If in doubt, consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured as follows:
Blue-Neutral
Brown-Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be connected
to the terminal which is marked with N or coloured blue. The wire which is
coloured brown must be connected to the terminal which is marked L or
coloured brown. Always ensure that the plug cord grip is fastened correctly.
The shipped version of this device complies with the
requirements of EEC directives 2004/108/EC "Electromagnetic
compatibility" and 2006/95/EC "Low voltage directive"
WA S T E E L E C T R I C A L P R O D U C T S S H O U L D N O T B E
DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE
RECYCLE WHERE FACILITIES EXIST. CHECK WITH YOUR
LOCAL AUTHORITY FOR RECYCLING ADVICE.
Haier Europe Trading S.R.L.
Via De Cristoforis,12-I 21100 Varese,Italy
35