S-Video Input - Wharfedale Pro LT19R1BW User Manual

Connection Instructions
COMPONENT (If connected to SVIDEO,select the S-VIDEO external
input source.)
3. Refer to the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the component
input ports as shown below.

S-VIDEO Input

- To avoid picture noise (interference), leave an adequate distance between the
VCR and TV
Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has
S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are switched off;
Connection Option 1
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Connection Option 2
1. Connect the audio and S-Video cables
from the VCR's output jacks to the TV
input jacks, as shown in the figure.
2. Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the
VCR owner s manual.)
.Turn on the power of the LCD-TV first ;
3
and then turn on the power of the AV
device;
4.Press the SOURCE button to set the video
.
input mode of the LCD-TV to SVIDEO
mode .
Y
Pb
Pr
Customer helpline:0845 604 0105
2
1
VCR