Operation Requirements - Sanyo PLC-XU355A - 3500 Manual

PLC-XU305/355 Basic Serial Command Specifications

6.4. Operation Requirements

When the projector's status is any of below, Functional Execution Commands are limited.
Projector Status
Standby Mode
Countdown in process
Cooling Down in process
Cooling Down due
Temperature
Abnormal Temperature Status
Abnormal Power Status
Power Save / Cooling Down in process
Power Save Status
Input searchÿ On1/On2 setting
Note) When the status is as above, even if the projector receives other commands,
it returns [ACK] [CR].
Available Functional Execution Commands
C00ÿ POWER ON
C00ÿ POWER ON → Countdown is terminated
C01ÿ POWER OFF
C02ÿ POWER OFF → Countdown is terminated
NONE (No Execution)
to Abnormal
NONE (No Execution)
NONE (No Execution)
NONE (No Execution)
NONE (No Execution)
C00ÿ POWER ON
C01ÿ POWER OFF
Although transmit Input source commands, Input
search does not operate.
10/25