Panasonic Viera TX-P42G30B Operating Instructions Manual page 32

Menu Item
Screen Display
Intelligent Frame
Creation
24p Smooth Film
Clear Cinema
Resolution
Enhancer
Side Panel
16:9 Overscan
DVI Input Setting
Pixel Orbiter
Scrolling Bar
Reset to Defaults
Mode
Bass
Treble
32
Adjustments / Configurations (alternatives)
Turns the screen off when you select [Off] [Off] / [On]
•
The sound is active even if the screen turns off.
•
Press any buttons (except Standby) to turn the screen on.
•
This function is effective in reducing power consumption when
listening to the sound without watching the TV screen.
Automatically compensates the picture frame rate and removes
juddering movements to make the images smooth [Off] / [Mid] / [Max]
•
Depending on the contents, images may be noisy. To prevent the
noise, change the setting.
•
This function is not available for selection (default to [Off]) when [Viewing
Mode] is set to [Game] in the mode of or network service operations.
Automatically compensates the picture frame rate to make the 24p
source movie images smooth [Off] / [Mid] / [Max]
•
This is available only for 24p signal input and displayed instead of
[Intelligent Frame Creation].
•
This function is not available for selection (default to [Off]) when [Viewing
Mode] is set to [Game] or in the mode of network service operations.
Improves vertical resolution for movie images [Off] / [On]
•
This function is available for the interlaced signal (except when
[Viewing Mode] is set to [Game]).
Enhances the picture resolution to make the image sharper [Off] / [Mid] / [Max]
•
This function is available for SD (Standard definition) signal.
•
As for HD (High definition) signal, this function is available when
aspect mode is set to [16:9] ([16:9 Overscan] is set to [On]) or [Zoom].
•
Not valid on Media Player and network service operations
Increases the brightness of the side panel [Off] / [Low] / [Mid] / [High]
•
The recommended setting is [High] to prevent panel "image retention".
Selects the screen area displaying the image [Off] / [On]
[On] : Enlarges the image to hide the edge of the image.
[Off] : Displays the image in the original size.
•
Set to [On] if noise is generated on the edge of the screen.
•
This function is available when aspect is set to [Auto] (16:9 signal only) or [16:9].
•
This function can be memorised separately for SD (Standard
definition) and HD (High definition) signals.
•
Not valid on VIERA Connect
Changes the black level in the image for HDMI input mode with DVI
input signal manually [Normal] / [Full]
•
When the DVI input signal from the external equipment, especially from PC,
is displayed, the black level may not be suitable. In this case, select [Full].
•
The black level for HDMI input signal will be adjusted automatically.
•
For HDMI input mode with DVI input signal only
Selects the mode for wobbling of the image to prevent panel "image
retention" [Auto] / [On]
[Auto] : Automatically works only for the appropriate images and you
rarely recognise the wobbling.
Scrolls the vertical bar to prevent panel "image retention"
•
Press the OK button to start scrolling and press any buttons (except
Standby) to exit this mode.
Press the OK button to reset the present Picture Viewing Mode to the default settings
Selects the basic sound mode [Music] / [Speech] / [User]
•
The selected mode affects all input signals.
[Music] : Improves sound quality for watching music videos, etc.
[Speech] : Improves sound quality for watching news, drama, etc.
•
In Music and Speech modes, you can adjust [Bass] and [Treble]
settings, and those settings will be stored for each mode.
[User] : Adjusts the sounds manually by using the equaliser to suit your
favourite sound quality.
•
For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass] and
[Treble]. Select the [Equaliser] and adjust the frequency.
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
[Equaliser] (p. 33)