Table of Contents
Advertisement
210
ESV16 User's Manual
DI Setting
This function allows users to use camera's digital input port from the
recorder as source of an event. You can setup the recorder to receive
events from a particular camera's input port and then triggers the NVR
to start recording.
*The recorder only acts as a medium for pairing up input/output ports
between cameras and the recorder.
*Only connected cameras will be displayed in the list.
*Some cameras only allow one trigger source be configured at a time,
e.g.:
if the camera has the motion detection function turned on, its digital
input will be disabled and vice versa. Under such circumstance, if you
set to use camera's digital input port as the event trigger source, you
will not be able to select motion detection as the trigger source for this
camera under "Event Trigger" setup page.
* The image(s) that are uploaded to the destined FTP server or
emailed to a destined mail recipient are in their own proprietary image
file format (.h4i or .p4i), which can only be opened by the NVR media
player.
Advertisement
Table of Contents
