Electro-Voice LPA500 Owner's Manual page 3

Clamps
Clamps are provided for mounting the LPA500 on
pipes, scaffolds, tree limbs, etc.. Attach the
clamps with the hardware supplied. See Figure 4.
Do not clamp the antenna to horizontal metal
objects that extend past the clamp. See Figure
5. This will detune the antenna and cause loss
of range and performance.
LPA500
BOLT
LOCKWASHER
GOOD
Clamp Mounting
NOTE OFFSET
IN CLAMPS
WING NUT
Figure 4
Clamps
Figure 5
-3-
LPA500
UHF
LOG PERIODIC ANTENNA
R
THIS END TOWARD TRANSMITTER
BAD