Gigabyte GA-Z77X-UD5H User Manual page 27

3) ATX4P (PCIe Power Connector)
The power connector provide auxiliary power to the onboard PCI Express x16 slots. When two or more
graphics cards are installed, we recommend that you connect the SATA power cable(s) from the power
1
supply to the ATX4P connector to ensure system stability.
1
4/5) CPU_FAN/SYS_FAN1/SYS_FAN2/SYS_FAN3/SYS_FAN4 (Fan Headers)
All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.
When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is
the ground wire). The speed control function requires the use of a fan with fan speed control design. For
optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.
• Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the
headers.
DIP
1 2 3
3 2 1
DIP
1
15
1
CPU_FAN
1
SYS_FAN1/SYS_FAN2
1
SYS_FAN3/SYS_FAN4
SYS_FAN2/3:
Pin No. Definition
1 GND
2 +12V
3 Sense
4 Speed Control
- 27 -
Pin No. Definition
1 NC
2 NC
3 NC
4 GND
5 GND
6 GND
7 VCC
8 VCC
9 VCC
10 GND
11 GND
12 GND
13 +12V
14 +12V
15 +12V
CPU_FAN:
Pin No. Definition
1 GND
2 +12V /Speed Control
3 Sense
4 Speed Control
SYS_FAN1:
Pin No. Definition
1 GND
2 +12V /Speed Control
3 Sense
4 VCC
SYS_FAN4:
Pin No. Definition
1 GND
2 +12V
3 Sense
4 Reserve
Hardware Installation