Gigabyte GA-Z77X-D3H User Manual page 11

Storage Interface Chipset:
Š
- 2 x SATA 6Gb/s connectors (SATA3 0/SATA3 1) supporting up to 2 SATA
6Gb/s devices
- 4 x SATA 3Gb/s connectors (SATA2 2~SATA2 5) supporting up to 4 SATA
3Gb/s devices
- 1 x mSATA connector
* The SATA2 5 connector will become unavailable when the mSATA connector is
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system
1 x Marvell 88SE9172 chip:
Š
- 2 x SATA 6Gb/s connectors (GSATA3 6/GSATA3 7) supporting up to 2 SATA
6Gb/s devices
- Support for RAID 0 and RAID 1
USB Chipset:
Š
- Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through
the internal USB headers)
* In Windows XP, the Intel USB 3.0 ports can support up to USB 2.0 transfer speed.
- Up to 6 USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through
the internal USB headers)
VIA VL800 chip:
Š
- Up to 4 USB 3.0/2.0 ports on the back panel
* Due to a Windows 7 limitation, please connect your USB device(s) to the USB 2.0/1.1
Internal 1 x 24-pin ATX main power connector
Š
Connectors 1 x 4-pin ATX 12V power connector
Š
4 x SATA 6Gb/s connectors
Š
4 x SATA 3Gb/s connectors
Š
1 x mSATA connector
Š
1 x CPU fan header
Š
3 x system fan headers
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
1 x USB 3.0/2.0 header
Š
2 x USB 2.0/1.1 headers
Š
1 x serial port header
Š
1 x Clear CMOS jumper
Š
1 x Trusted Platform Module (TPM) header
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
Connectors 1 x D-Sub port
Š
1 x DVI-D port
Š
1 x HDMI port
Š
installed with a solid state drive.
performance of the RAID set may vary depending on the devices being connected.
port(s) before the VIA USB 3.0 controller driver is installed.
- 11 - Hardware Installation