TV Format
Set the video signal format to be output for the TV you are using.
Setting items
NTSC : Select NTSC output.
Format
PAL : Select PAL output.
"Format" can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit's
3 seconds.
"V.Format : <NTSC>" appears on the display.
2. Use the main unit's
video signal format.
3. Press the main unit's
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
DVD
Video
Default settings are underlined.
Setting details
STATUS
ZONE2 SOURCE
and
for at least
INTERNET RADIO
ZONE2 SOURCE
or
and set the
STATUS
to complete the setting.
112