Panasonic PT-VW435NU Operating Instructions Manual page 70

Network
WPA2-EAP
Encryption
z
NONE
WEP
 1
TKIP
 1
AES
 1
Channel

3
1: "Glossary" (

2: Available when the mode is set to

[Infrastructure].
3: Available when the mode is set to [AD HOC].

Note
Important video/audio data is protected because AES
z
encryption processing takes place in advance for all
network numbers, even if [Encryption] is set to [NONE].
4 ) Press ▲ ▼◄► to select [Next], and
press <ENTER> button.
At this point, select [Back] to go back to the
previous screen (1/3), or select [Cancel] to
cancel the configuration change.
In addition, further perform the following
setting depending on [Authentication] and
[Encryption] settings.
70
- ENGLISH
Select when the
access point
 2
authentication method
is WPA2-EAP

Select the encryption
method to be used for
communication between
the projector and the
network.
Select when transmit
without encryption. It is
selectable only when
[Authentication] is [OPEN]
or [SHARED].
Select when Encryption is
WEP.
Select when Encryption is
TKIP.
Selectable when
[Authentication] is either
[WPA-PSK], [WPA2-
PSK], [WPA-EAP],
[WPA2-EAP].
Select when Encryption is
AES.
Selectable when
[Authentication] is either
[WPA-PSK], [WPA2-
PSK], [WPA-EAP],
[WPA2-EAP].
Select the channel to use.
Refer to page 6 for usable
channels.
Æ
page 117 – 118)
Note
The setting menu is different depending on the setting
z
of [Authentication] and [Encryption]. The above menu is
.
1
an example when [Authentication] is set to [OPEN] or
[SHARED] and [Encryption] is set to [WEP].
When setting [OPEN] or [SHARED]
z
as authentication and setting
[WEP] as the encryption method:
Default key Set 1 – 4 numerals for the
KEY1 – 4
When using [WPA-PSK] or
z
[WPA2-PSK] :
When the authentication method
z
is [WPA-EAP/WPA2-EAP], [WPA-
EAP], [WPA2-EAP]:
default key.
Set a WEP key to the key
number selected with
[Default key].
Either the 64-bit or 128-bit
WEP key can be set. For
the 64-bit key, input five
alphanumerics (or a 10-digit
string for the hexadecimal
format) for the 128-bit key,
input 13 alphanumerics
(or a 26-digit string for the
hexadecimal format).
Set a key.
Input either 8 to 63
alphanumerics or a 64 digit
string in the hexadecimal
format.