Connecting A Vcr - Insignia NS-46E340A13 User Manual

Using composite video (good)
To connect a DVD or Blu-ray player using
composite video:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect an AV cable (not provided) to the
COMPONENT/AV Y/VIDEO jack and L and R
audio jacks on the back of your TV and to the AV
OUT jacks on the DVD or Blu-ray player.
Note
• The COMPONENT/AV Y/VIDEO, P
video jacks (used to connect a component
device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to
connect a composite device).
• When you connect the audio using the L and R
audio jacks, the audio output is analog.
Cables are often color-coded to match color-coded jacks.
Note: The yellow video connector on the AV cable connects
to the green COMPONENT/AV Y/VIDEO jack.
Back of TV
3 Plug your TV's power cord into a power outlet,
then turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to select AV, then press ENTER.
Notes
You can also press VIDEO to select the DVD or Blu-ray
player.
14
, and P
B R
DVD or Blu-ray player
Y / VIDEO
AV cable
www.insigniaproducts.com
NS-46E340A13 Insignia 46" LED TV

Connecting a VCR

To connect a VCR:
1 Make sure that your TV's power cord is
unplugged and the VCR is turned off.
2 Connect an AV cable (not provided) to the
COMPONENT/AV Y/VIDEO jack and L and R
audio jacks on the back of your TV and to the AV
OUT jacks on the VCR.
Note
• The COMPONENT/AV Y/VIDEO, P
video jacks (used to connect a component
device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to
connect a composite device).
• When you connect the audio using the L and R
audio jacks, the audio output is analog.
Cables are often color-coded to match color-coded jacks.
Note: The yellow video connector on the AV cable connects
to the green COMPONENT/AV Y/VIDEO jack.
Back of TV
3 Plug your TV's power cord into a power outlet,
then turn on your TV and the VCR.
4 Press INPUT to open the INPUT SOURCE list.
5 Press or to select AV, then press ENTER.
Note
You can also press VIDEO to select the VCR.
6 Insert a videotape in the VCR, then press PLAY
on the VCR.
, and P
B R
VCR
Y / VIDEO
AV cable