Adjusting The Sound; Adjusting Sound Settings - Insignia NS-26E340A13 User Manual

Insignia 26" LED TV
6 Press or to adjust the option, or press
to select a setting.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.

Adjusting the sound

Adjusting sound settings

To adjust sound settings:
1 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
Reset Picture Settings
OK
Move
ENTER
Adjust settings to affect picture quallty
2 Press or to highlight AUDIO, then press
OK. The Audio menu opens.
Audio
Sound Mode
Balance
Advanced Audio
Reset Audio Settings
OK
Move
ENTER
Adjust settings to affect sound quallty
3 Press or to highlight an option, then press
OK to access the option. You can select:
• Sound Mode—Selects the sound mode. You
can select:
• Standard—Balances treble and bass. This
setting is good for watching standard TV
broadcasts.
• News—Enhances vocals for TV audio. This
setting is good for watching news
broadcasts.
• Music—Preserves the original sound. This
setting is good for listening to music.
• Theater—Enhances treble and bass for a
rich sound experience. This setting is good
for watching DVDs, Blu-ray discs, and
HDTV.
• Custom—Lets you manually adjust sound
settings.
Note
You can also press AUDIO to select the sound mode.
• Balance—Adjusts the balance between the
left and right audio channels.
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
Energy Savings
00
00
00
00
00
Select Previous Exit
MENU
EXIT
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
Standard
0
Select Previous Exit
MENU
EXIT
www.insigniaproducts.com
or • Advanced Audio—Opens the
Audio-Advanced Audio menu where you can
adjust additional audio options.
Headphone/ Audio Out
Fixed / Variable
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• TV Speakers—Selects where to play TV
audio. You can select On (default setting)
to play audio through TV speakers, or
select Off to play audio through the
speakers on an external audio system.
• Digital Audio/SPDIF—Sends digital audio
to an external audio system. You can select
PCM (to output audio in 2-channel stereo),
or
or RAW (to pass through the original
digital audio sound).
• MTS/SAP—(Analog channels only) Selects
the audio mode. You can select:
• MONO—Select this option if there is
• STEREO—Select this option for
• SAP—Select this option to listen to a
• Audio Language—(Digital channels only)
Selects an alternate audio language, if
available.
• Headphone/Audio Out—You can use the
/AUDIO OUT jack on the side of your TV
to connect headphones, an amplifier, a
home theater system, or a sound bar. If you
connect headphones, select Headphone.
If you connect an amplifier, home theater
system or sound bar, select Audio Out.
• Fixed/Variable—When
Headphone/Audio Out is set to Audio
Out, this setting selects the remote control
you use to control the volume on the audio
device to the
Fixed to use the remote that came with
the connected audio device. Select
Variable to use the remote that came with
your TV.
• Reset Audio Settings—Resets all audio
settings to factory defaults.
noise or static on weak stereo
broadcasts.
programs broadcast in stereo.
secondary audio program, if available.
Note
You can also press MTS/SAP on the
remote control one or more times to
select the audio mode.
/AUDIO OUT jack. Select
Headphone
25