Insignia NS-42E480A13 User Manual page 19

Insignia 39"/42"/46" 1080p LED TV
Using component video (better)
Note
The back of your TV may vary from the illustration
based on the model of your TV.
To connect a DVD or Blu-ray player using
component video:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect a component video cable (not
provided) to the COMPONENT IN Y, P
jacks on the back of your TV and to the
COMPONENT OUT jacks on the component
video device.
Back of TV
Component video cable
Cables are often
color-coded to match
color-coded jacks.
3 Connect an audio cable (not provided) to the
COMPONENT IN L/R audio jacks on the back of
your TV and to the L/R AUDIO OUT jacks on the
DVD or Blu-ray player.
Notes
• When you connect the audio using the
COMPONENT IN L/R audio jacks, the audio
output is analog.
4 Plug your TV's power cord into a power outlet,
then turn on your TV.
5 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
6 Press INPUT to open the Input source list.
7 Press or to select Component, then press
ENTER.
Note
You can also press VIDEO one or more times to select
the DVD or Blu-ray player.
, and P
B
Audio cable
DVD or Blu-ray player
www.insigniaproducts.com
Using composite video (good)
Note
The back of your TV may vary from the illustration
based on the model of your TV.
To connect a DVD or Blu-ray player using
composite video:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect an AV cable (not provided) to the
AV IN VIDEO jack and AV IN L/R audio jacks on
R
the side of your TV and to the AV OUT jacks on
the DVD or Blu-ray player.
Note
When you connect the audio using the AV IN L /R
audio jacks, the audio output is analog.
DVD or Blu-ray player
Cables are often color-coded to
match color-coded jacks.
3 Plug your TV's power cord into a power outlet,
then turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
5 Press INPUT to open the Input source list.
6 Press or
Notes
You can also press VIDEO one or more times to select
the DVD or Blu-ray player.
AV cable
Side of TV
to select AV, then press ENTER.
15