Installing The Tv On A Wall - Vizio E500AR User Manual

To install the TV stand:
1. Place the TV screen-down on a clean, flat surface. To prevent
scratches or damage to the screen, place the TV on a soft
surface, such as carpet, rug, or blanket.
2. Align the stand with the TV.
3. Attach the stand to the TV by tightening the pre-installed
screws.
4. Move the TV with attached stand into an upright position
and place on a flat, level, and stable surface.
5. To ensure proper ventilation, leave at least 1" of space
between the back of the TV and any other objects (walls,
etc).
E240AR
E320AR, E420AR, & E500AR

Installing the TV on a Wall

To mount your TV on a wall, you will need a wall mount. Consult
the information below to find the appropriate mount for your TV
model:
Installing a TV on a wall requires lifting. To prevent
injury or damage to the TV, ask someone to help you.
E240AR
Screw
M4
Size:
Screw
12mm
Length:
Hole 100mm (V) x
Pattern: 100mm (H)
Be sure the mount you choose is capable of supporting the
weight of the TV. After you have determined that you have the
correct mount for your TV, you can begin the installation.
To install your TV on a wall:
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, flat, stable surface.
Be sure the surface is clear of debris that can scratch or
damage the TV.
3. Remove the stand by loosening and removing the screws.
4. Attach your TV and wall mount to the wall, carefully following
the instructions that came with your mount.
Use only with a UL-listed wall mount bracket rated for the
weight/load of this TV. See Appendix B - Specifications for the
weight of this TV.
For some wall mounts, you may want to use cables
with right-angle connectors. This allows the TV to rest
closer to the wall.
4
E320AR E420AR
M6 M6
12mm 12mm
200mm (V) x 300mm (V) x
200mm (H) 300mm (H)
1
E500AR
M6
12mm
300mm (V) x
300mm (H)