Introduction; Installing The Stand Or Wall-Mount Bracket; Installing The Stand; Installing A Wall-Mount Bracket - Insignia NS-50L240A13 User Manual

Introduction

Congratulations on your purchase of a high-quality
Insignia product. Your NS-50L240A13 represents
the state of the art in LCD TV design and is designed
for reliable and trouble-free performance.
Installing the stand or
wall-mount bracket
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.

Installing the stand

To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Make sure that the wide portion of the stand
base faces the front of your TV, then align the
stand column with the stand and secure the
stand to the TV screen with the four provided
screws.
Screw type Screw length # of screws
M5
4
Insignia 50" LCD TV
8 mm 4
www.insigniaproducts.com
NS-50L240A13 Insignia 50" LCD TV

Installing a wall-mount bracket

Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
"Miscellaneous" on page 53.)
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Remove the screws that secure the stand
column to the TV screen, then remove the stand
column.
3 Attach the wall-mount bracket to your TV using
the mounting holes on the back of your TV. See
the instructions that came with the wall-mount
bracket for information about how to correctly
hang your TV.
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take
type M6 screws.
15.75 in. (400 mm)
Wall-mount brackets