ViewSonic PJD7820HD User Manual page 49

Function
Quick Auto
See
Search
HDMI Format
See
HDMI Range
Allows the projector to decrease the power consumption automatically
DynamicEco
if no input signal is detected after a set period of time.
Timer
Selecting On enables you to restart the projector immediately within
150 seconds after turning it off. After 150 seconds, if the projector is
not turned on again, it will directly enter the standby mode.
Smart
Restart
The projector can display several test patterns. It helps you adjust the
Pattern
image size and focus and check that the projected image is free from
distortion.
My Button
Sets a hotkey on remote control.
"Switching input signal" on page 24
"Changing HDMI input settings" on page 24
It takes some time to initiate this function. Make sure the
projector has been turned on for more than 4 minutes.
•It takes some time to initiate this function. Make sure the
projector has been turned on for more than 4 minutes.
If the projector is resumed by using the Smart Restart feature,
this function can be executed immediately.
•When On is selected, the Quick Power Off function will be
automatically set to "On".
44
Description
for details.
for details.