Verifying Under Windows 2000; Verifying Under Windows Xp; Registering Your 3Dlabs Graphics Accelerator Card - 3Dlabs Workstation x1000 User Manual

Verifying under Windows 2000

1. From the operating system Start menu, go to Settings/Control Panel/System/Advanced.
2. Click Startup and Recovery.
3. On the Startup and Recovery dialog box, verify that "Microsoft Windows 2000
Professional" is the listed as the Default operating system. It is IMPORTANT that your
operating system matches the driver you installed. Click OK.
4. Click OK again to close the System Properties dialog box.

Verifying under Windows XP

1. From the operating system Start menu, go to Control Panel/Performance and
Maintenance/System/Advanced.
2. Click the Settings button under Startup and Recovery.
3. On the Startup and Recovery dialog box, verify that "Microsoft Windows XP Professional"
is the listed as the Default operating system. It is IMPORTANT that your operating system
matches the driver you installed. Click OK.
4. Click OK again to close the System Properties dialog box.

Registering Your 3Dlabs Graphics Accelerator Card

When you register your 3Dlabs Graphics Accelerator Card you:
Activate your warranty
Receive notification of software updates
Qualify for technical support
You can complete the registration card and return it to us in the mail, or register on-line once your
hardware and software installations are complete. (You must have Internet access to register on-line.)
1. Open your Internet browser.
2. Go to http://www.3dlabs.com/support/product_registration.htm
3. Fill out the registration form that appears on your screen, and click Submit when you are finished.
18
SOFTWARE CONFIGURATION
3Dlabs Graphics Accelerator Card User's Guide