USING THE MONITOR
Connecting to a PC
Your Monitor supports Plug & Play. When
connected to a PC and turned on, the device will
connect automatically without configuration or
user intervention.
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor with
the supplied D-sub 15 pin signal cable as shown in
the following illustrations.
H/P
HDMI 2
HDMI 1
D-SUB IN
D-SUB OUT
NOTE
When using a D-Sub signal input cable
y
connector for Macintosh
H/P
H/P
Mac adapter
y
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.
D-SUB IN
USB UP
D-SUB OUT
HDMI connection
Transmits the digital video and audio signals from
your PC or A/V to the Monitor. Connect the PC or
A/V and the Monitor with the HDMI cable as shown
in the following illustrations.
H/P
HDMI 2
HDMI 1
HDMI 2
HDMI 1
HDMI OUT
NOTE
This monitor support PC input via HDMI,
y
HDMI OUT
but you may experience some compatibility
issues.
USING THE MONITOR
USB UP
D-SUB IN
(sold separately)
HDMI OUT
HDMI OUT
9