Samsung UN40B7000WF Firmware Upgrade Manual page 4

10. Press the MENU button to display
the menu. Press the ▲ or ▼ button
to select "Support", then press the
ENTER button
12. The message "Scanning for USB.
It may take up to 30 seconds"
is displayed.
※ Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has a lower version
number than the version on your TV, do not install it.
9. Turn your TV on, and then insert
the USB Memory Drive containing
the firmware into the USB port
on the rear of the TV
11. Press the ▲ or ▼ button to select
"Software Upgrade", then press the
ENTER button.
13. Then, the message "Upgrade
Version XXXX to version XXXX?
The system will be reset after
upgrade." is displayed.
Select "Yes", then press the ENTER
button.