Lenovo ThinkPad G41 Manual page 7

Step 15. When a message is displayed prompting you to restart the computer, click
Yes and remove the disc. The remainder of the conversion process is fully
automated and no action is required by you. The computer will restart
several times and you might experience periods when no activity is
apparent on the screen for several minutes at a time. This is normal; be
patient.
Step 16. When the conversion process is complete, the Welcome to Microsoft
Windows screen is displayed. Follow the instructions on the screen to
complete the Windows setup.
Step 17. After you have completed the Windows setup, you can restore the original
startup sequence as follows:
a. Shut down your operating system and turn off your computer.
b. When the logo is displayed, press and release the F1 key. The Setup
Utility program opens.
c. Press F9 to select Setup Defaults.
d. Press F10 to save and exit the Setup Utility.
e. When prompted, select Yes in the Setup Confirmation window and then
press Enter.
Note: After the conversion process is complete, you might have to reinstall device
drivers for some devices. Depending on your model, refer to the Lenovo Care
program or the ThinkVantage
Lenovo, the Lenovo logo, Rescue and Recovery, ThinkPad, and ThinkVantage are
trademarks of Lenovo in the United States, other countries, or both. IBM is a
trademark of International Business Machines Corporation in the United States, other
countries, or both. Microsoft, Windows, and Windows Vista are trademarks of
Microsoft in the United States, other countries, or both. Other company, product, or
service names may be trademarks or service marks of others.
®
Productivity Center for details.
Using the Microsoft Windows XP Conversion Kit
5