Replacing The Keyboard - Lenovo IdeaCentre B300 Hardware Replacement Manual

Lenovo ideacentre b3 series hardware replacement guide
Hide thumbs Also See for IdeaCentre B300:
Table of Contents

Advertisement

Replacing the keyboard

Attention:
Do not remove the computer cover or attempt any repair before reading the
"Important safety information" in the Safety and Warranty Guide that was
included with your computer or in the Hardware Maintenance Manual (HMM)
for the computer. To obtain copies of the Safety and Warranty Guide or
HMM, go to the Support Web site at http://consumersupport.lenovo.com.
To replace the keyboard:
1. Remove any media (diskettes, CDs, or memory cards) from the drives,
shut down your operating system, and turn off all attached devices and the
computer.
2. Unplug all power cords from electrical outlets.
3. Locate the connector for the keyboard. Refer to "Left and right view" and "Rear
view".
Note: Your keyboard might be connected to the standard keyboard
connector
or rear of the computer.
1
4. Disconnect the failing keyboard cable from the computer and connect the new
keyboard cable to the same connector.

Hardware Replacement Guide
31043502_B3_HRG_EN_V1.0.indd 16
at the rear of the computer or to a USB connector
2
either side
2010.4.14 4:13:49 PM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ideacentre b305Ideacentre b3 series

Table of Contents