Viewing The Connection Panel - Samsung LN-T375HA Owner's Instructions Manual

Viewing the Connection panel

rear panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
For more information on connecting equipment, see pages 6-12.
1 audIo out
Connects to the audio input jacks on your Amplifier/
Home theater.
2 dIGItal audIo out (optICal)
Connects to a Digital Audio component.
3 Ex-lInK
Connect this to the jack on the optional
wall mount bracket. This will allow you to adjust the
TV viewing angle using your remote control.
see page 66.)
(
4 pC In
Connects to the video and audio output jacks on your
PC.
5 hdmI In ,, /dVI In(hdmI) (audIo r/l)
Connects to the HDMI jack of a device with an HDMI output.
U se the HDMI 1 IN terminal for a DVI connection to an external
device. You should use the DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for a video connection,and the DVI IN
'R-AUDIO-L' terminal for audio.
- N o sound connection is needed for an HDMI to HDMI
connection
- W hen using an HDMI/DVI cable connection, yor must use the
HDMI IN 1 terminal.
6 ant  In/ant  In
Connects to an antenna or cable TV system.
7 aV In , aV In 
Video and audio inputs for external devices, such as a
camcorder or VCR.
S-VIdEo
Connects an S-Video signal from a camcorder or VCR.
hEadphonE
8
Connects a set of external headphones for private
listening
9 SErVICE
Connector for software upgrades (see page 62).
0 powEr Input
Connects the supplied power cord
! ComponEnt In ,
Connects Component video/audio.
@ KEnSInGton loCK
The Kensington lock (optional) is a device used to
physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer
where you purchased the TV.
The place of the Kensington Lock may be different
depending on its model.
English - 
[Side panel Jacks]