Table of Contents
Advertisement
2.3 Copying your drive
Important: If the hard drive that you want to copy contains more than
one partition, you must copy each partition, one at a time, to the new hard
drive. If the power or the hardware fails while you copy the data, no data
is lost from the source drive. However, you must restart the copying
process from the beginning.
For Windows XP Users
Before beginning the copy process, you must first determine how your
drive is partitioned.
following:
Case 1
In the scenario above, the drive is partitioned into two separate "Primary
Partitions."
essential files, while the second partition "D:" contains all user data.
While in this example there are only two (2), you may have up to four (4)
separate data partitions.
Case 2
In the other likely scenario, the user will see one "Primary Partition"
containing all Windows OS files and user data together.
Regardless of which scenario above is similar to your own, follow these
steps:
1. Make sure the SSD is connected and initialized.
2. Select [Tools] from the Norton Ghost toolbar.
Windows XP users will see cases similar to the
The first partition, "C:" contains the Windows OS and its
10
Advertisement
Table of Contents
