Brother RJ4040-K RuggedJet w/WiFi Battery User Manual page 59

Problem
I want to reset the printer/delete the data
transferred from the computer.
I want to cancel the current print job.
When printing via the USB cable, the
printer repeatedly pauses and then
continues printing.
An error occurs when the roll cannot be
fed to the beginning of the label.
The computer program should be
sending data to the printer, but the
POWER indicator does not blink green
Solution
To reset the printer, perform the following procedure;
1 Press and hold the
2 Press and hold the
button until the POWER, STATUS and BATTERY
indicators start blinking in orange.
3 While pressing the
button 3 times.
4 Release the (Power) button and the
the same time.
All the transferred data from the computer will be deleted and
reset the printer to factory settings.
Make sure that the printer is ON, and press the
button.
Is the printer set for sequential printing?
If so, set print mode to buffered printing.
®
Windows XP:
Open the printer properties from [Control Panel] - [Printers
and Other Hardware] - [Printers and Faxes] and click
[Printing Preference] button in the [General] tab. Click the
[Other] tab and choose the option [After one page of data is
received].
®
Windows Vista :
Open printer properties from [Control Panel] - [Hardware and
Sound] - [Printers] and click [Printing Preference] button in
the [General] tab. Click the [Other] tab and choose the option
[After one page of data is received].)
®
Windows 7:
Open printer properties from [Devices and Printers],
right-clicking the printer whose settings are to be changed, and
selecting [Printing Preference]. Choose the option [After one
page of data is received].
If a feed error occurs, use the Custom Label Tool to assign the
correct paper settings to the printer.
Make sure that the USB cable is connected firmly and correctly.
Try using another USB cable.
Depending on whether you are using Bluetooth or Wi-Fi,
confirm that the (Bluetooth) indicator or the
indicator is lit in blue. If it is not, check the connection.
(See Connecting the Computer and Printer uu page 21.)
Troubleshooting
(Power) button to turn the printer off.
(Feed) button and the
(Power) button, press the
(Feed) button at
(Power)
(Feed)
(Power)
8
(Wi-Fi)
55