NETGEAR WNR612v2 - Wireless-N 150 Router Installation Manual page 2

Router Configuration
Set up internet connection
1. In your browser address
field type http://
www.routerlogin.net and
click Enter.
2. When the first screen
opens, if you would like
help setting up your
wireless network, select
the button next to "Yes,
please guide me through the options." If you are an
advanced user and prefer to manually configure your
router, select the button next to "No, I am an advanced
user..." Then click Next.
Set up wireless security
1. Select a wireless mode.
(The default value is 150
Mbps: Performance
Mode, which gives you
the maximum wireless
speed.) Click Next.
2. Now, select your wireless
security method.
NETGEAR recommends
WPA-PSK [TKIP] +
WPA2-PSK [AES]
(the default value that is
already selected).
3. Choose a Passphrase. You
might want to write it down
in the area provided on the
middle panel. (Example:
HomeNetwork). You have
the option to print this
screen. Click Next.
Note: Both your network
name (SSID) and
passphrase are case
sensitive.
4. Review your network
settings on the summary
page. You may want to
print this for your records.
Click Next to apply all
settings and continue to
follow instructions in the
next section.
Connect Wireless Devices to your Router
1. Open the software that manages your wireless connections
on the wireless device that you want to connect to your
router. (For example, on Windows XP, go to Control Panel
->Network Connections, right click the wireless device
and select View Available Wireless Networks).
2. The wireless software will scan for all wireless networks in
your area. Look for and select the network name that you
chose when you set up your router.
3. If your network is secured, you will be prompted for a
Passphrase or network key. Enter the Passphrase you
selected and click Connect. You are now finished with the
installation.