Table of Contents
Advertisement
2 Release the PTT button to listen.
If you receive an error message:
• No one is on your channel or code.
• You are out of range.
receiving code calls
When you receive a code call, Receive will
appear on the display. After hearing the
MOTOtalk tone, you have 6 seconds to reply
before the call times out.
To reply to the call, press the PTT button.
Note: An incoming MOTOtalk call can be
terminated at any time by pressing ].
receiving all MOTOtalk calls
If you set the code to Receive All, your phone
can receive MOTOtalk transmissions from any
phone that is set to the same channel,
regardless of the code (1-15). When you
TM
98
MOTOtalk
receive transmissions with the code set to
Receive All, the code that the transmission was
received on will replace Receive All on the
display.
Note: You cannot initiate a code call when the
code is set to Receive All.
To set the code to Receive All:
1 From the MOTOtalk idle screen, press K
under Edit.
2 Scroll to Code.
3 Press K under Edit.
4 Select Receive All.
5 When you are finished, press K under
Back to return to the MOTOtalk idle screen.
To reply to a call with the code set to Receive All:
• Press the PTT button.
Advertisement
Table of Contents
