Table of Contents
Advertisement
4 Enter the name you want to appear. See
"Entering Text" on page 33. When you are
finished, press O.
You can also edit the information in Line 1, Line 2,
and Ckt, but your changes are only temporary. The
next time your phone registers on the network, the
your actual phone numbers and circuit data
number appear again in My Info.
Setting Sending Options
Your phone can send information in My Info to
other phones that have this capability.
You can control what portion of the information in
My Info is sent and whether it is sent automatically
in every Direct Connect call or only when you
choose to send it.
Information Sent
The information your phone sends always includes
My Name and Direct Connect.
It may include Line 1, Line 2, Carrier IP, and
Circuit Data, depending on how you set your
sending options.
The default setting is Line 1 only.
To change which fields are sent:
1 From the main menu, select My Info.
2 Press m.
3 Select Send My Info Setup > Info to Send.
4 A checkmark appears next to the fields that will
be sent. To add or remove the checkmark, select
the field.
5 When you are finished, press A under Done.
Automatic Sending
To control whether your information is sent
automatically:
1 From the main menu, select My Info.
2 Press m.
3 Select Send My Info Setup > AutoSend.
4 To set your information to be sent automatically,
set this option to On. -or-
To set your information to be sent only when you
choose to send it, set this option to Off.
Note: When you receive your phone, it set to
send your information automatically.
Setting Sending Options
107
Advertisement
Table of Contents
