Summary of Contents for ELANsat Tech Wireless Digital Audio
- Page 1 2.4GHz Wireless Digital Audio Pocket Receiver Pocket Receiver & Line-in 2 in 1 Line-in 2 in 1 Transmitter Transmitter Before operating the units, please read this manual thoroughly.
- Page 2 GENERAL SAFETY SUMMARY CAUTION RISK OF ELECTRONIC SHOCK DO NOT OPEN CAUTION: DO NOT REMOVE THE COVER FOR REDUCING THE RISK OF ELECTRIC SHOCK. NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING To prevent fire or shock hazard , do not expose the unit to rain or moisture.
- Page 3 9. Unplug the USB transmitter from the computer and refer servicing to qualified service personnel under the following conditions. When the computer or USB transmitter is damaged. If liquid have been spilled, or objects have fallen into the computer. If the product does not operate normally by following the operating instructions, adjust only those controls that are covered by the operating instructions as an improper adjustment of other control, may result in damage and will...
-
Page 4: Table Of Contents
Table of Contents Overview Features Package Contents Names of parts Getting Start Operations Trouble Shooting Specification... -
Page 5: Overview
Overview The 2.4GHz Wireless Digital Audio uses the latest wireless technology to transmit crystal-clear audio in a digital format. The pocket size receiver is easy to carry and the transmitter has two way to decide Audio source. It makes you enjoy the... -
Page 6: Package Contents
Package Contents Check the package before you enjoy the product. Pocket receiver (X1) USB / Line in Transmitter (X1) 1.5V AAA battery (X2) 9V DC adaptor (X1) Earphone (X1) Names of parts Transmitter LED: USB LED: Line in DC jack USB jack (X1) USB cable... -
Page 7: Getting Start
Receiver Strap eyelet LED(blue) Power LED(orange) Link Volume control Phone jack Channel selector Getting Start Open the battery compartment cover of receiver. Insert 2X AAA batteries into battery compartment. Make sure the plus and minus poles of battery was correctly touched their contains. Close the battery compartment cover. -
Page 8: Operations
4. Installation of earphone and Receiver Pierce through Screw off Audio source to transmitter 5.1 Audio source(PC or Notebook):Connect the transmitter to audio source with USB cable. 5.2 Audio source( DVD,VCD,CD,DAB Mp3):Connect the transmitter to audio source with RCA cable. With power adaptor plug the transmitter into standard electric outlet.(If Audio source is from PC or Notebook, you don’t need to plug with power adaptor.) -
Page 9: Trouble Shooting
Trouble Shooting Please read this users manual carefully before using the Wireless Audio Product. If you still have difficulties to use the product, consult the following syndrome, which will guide you to solve most common problems. No Sound Check the adaptor rightly connected. Check the batteries are in full electric power. -
Page 10: Specification
Specification Item Transmitter Description Supply voltage USB power or 9VDC Current consumption 100 mA (Typical.) Operating temperature Frequency range Modulation Channel number Channel spacing 2410, 2419 ~ 2473 MHz Channel frequency Frequency stability TX Power EIRP +10 dBm RX Sensitivity Response Dynamic range Separation... - Page 11 6060409015-11...