System Utility - Acer 710TE - Extensa - PII 233 MHz Service Manual

System Utility

BIOS
The flash Memory Update: The flash memory update is required for the
following conditions:
New versions of system programs
•
New features or options
•
Create a bootable diskette
C:\Sys A:
Copy flash utility & new versions BIOS to the diskette, then boot from diskette
driver.
A:\plash 700-40.rom /mode=3
Note: mode=3, set DMI value to system.
To activate the Setup Utility, press F2 during POST (while the Extensa logo is
being displayed.
Chapter 2
C h a p t e r 2
2-1