Remote Control Code - ViewSonic PJD6245 User Manual

12. Magnify
Displays the zoom bar that magnifies or
reduces the projected picture size.
13. Lock
Activates or deactivates panel key lock.
14. Freeze
Freezes the projected image.
15. Pattern
Displays embedded test pattern.
16. Blank
Hides the screen picture.
17. DynamicEco™
Decreases the power consumption of the
lamp by up to 30%.
It takes some time to initiate this
function. Make sure the projector has
been turned on for more than 4 minutes.
If the projector is resumed by using the
Smart Restart feature, this function can
be executed immediately.
18. Auto Sync
Automatically determines the best picture
timings for the displayed image.

Remote control code

The projector can be assigned to two different remote control codes, A or B. When several
adjacent projectors are in operation at the same time, switching the remote control codes
can prevent interference from other remote controls. Set the remote control code for the
projector first before changing that for the remote control.
To switch the code for the projector, select A or B in the SYSTEM SETTING:
ADVANCED > Remote Control Code menu.
To switch the code for the remote control, press PgUp and PgDn buttons on the remote
control together for 5 seconds or more. The initial code is set to A.
If different codes are set on the projector and remote control, there will be no response from
the remote control. When that happens, switch the code for the remote control again.
19. Color Mode
Selects an available picture setup mode.
20. Exit
Goes back to previous OSD menu, exits
and saves menu settings.
21. PgUp (Page Up)/PgDn (Page Down)
Operates your display software program
(on a connected PC) which responds to
page up/down commands (like Microsoft
PowerPoint) when the mouse mode is
activated.
22. Volume keys (+, -)
Magnifies or reduces the volume level.
23.
Toggles the projector audio between on
and off.
24. Aspect
Selects the display aspect ratio.
25. Timer
Displays the presentation timer settings
menu.
9